Safety instructions for operation

WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electrical shock, fire and/or serious injury.

Do not cut asbestos materials.
When dry cutting, make sure the dust is removed safely.
The information in this manual is not a replacement for professional knowledge and experience. If you do not feel safe in the situation that you are in, stop the product. Do not use the product in unknown situations.
Turn to your servicing dealer or Husqvarna if you have questions about the operation of the product. We can give you information about how to operate your product safely with best result.
Do not use a product, battery or battery charger that is defective.
Do not touch a rotating cutting blade. It can cause serious injuries or death.
Do not use the product in bad weather, for example, heavy fog or rain, strong wind and intense cold. Bad weather add risks such as ice on the ground.
Do not start a product unless all covers and guards are assembled correctly.
Look around you. Make sure that there is no risk that persons or animals touch or influence on your control of the product.
Do not let children use or be near the product. The product is easy to start. This can mean a risk of serious injury.
Remove the battery when you do not have full view of the product. Remove the battery if you will not use the product for a long time.
You must be stable on your feet in order to have full control of the product. Do not use the product if you are on a ladder. Do not use the product if you are not on stable ground.
Do not use the product above shoulder height.
If you are not careful, the risk of kickback increases.
Do not hold the product with one hand. This product is not safely controlled with one hand.
Do not use a product in a situation where you can not get for support if an accident occurs.
Make sure that you can move around safely. Examine the conditions and the terrain around you for possible obstacles.
Overexposure to vibration can lead to circulatory damage or nerve damage in people who have impaired circulation. Contact your doctor if you experience symptoms of overexposure to vibration. Such symptoms include numbness, loss of feeling, tingling, pricking, pain, loss of strength, changes in skin colour or condition. These symptoms normally appear in the fingers, hands or wrists. These symptoms may be increased in cold temperatures.
It is not possible to include each possible situation you can face when you use this product. Always be careful and use your common sense.
Note: After operating the tool, hearing protection must be lifted immediately when sawing is completed to hear sounds and warning signals can be heard.