To do a check of the power trigger lockout

  1. Make sure that the power trigger and power trigger lockout move freely and that the return spring works correctly.
  2. Press down the power trigger lockout and make sure that it goes back to its initial position when you release it.
  3. Make sure that the power trigger is locked at the idle position when the power trigger lockout is released.
  4. Start the product and apply full power.
  5. Release the power trigger and make sure that the cutting blade stops. If the cutting blade rotates when the power trigger is in the idle position, turn to your servicing dealer.
Parent topic: Maintenance and checks of the safety devices on the product