WARNING: Do not use waste oil, which can cause injury to you and the environment. Waste oil also causes damage to the oil pump, the guide bar and the saw chain.
WARNING: The saw chain can break if the lubrication of the cutting equipment is not sufficient. Risk of serious injury or death to the operator.
WARNING: Use the correct chain oil for this function to operate correctly. Speak to your servicing dealer when you select your chain oil.
-
Use Husqvarna chain oil for maximum saw chain life and to prevent negative effects on the environment. If Husqvarna chain oil is not available, we recommend you to use a standard chain oil.
-
Use a chain oil with good adherence to the saw chain.
-
Use a chain oil with correct viscosity range that agrees with the air temperature.
CAUTION:
In temperatures below 0°C/32°F some chain oils become too thick, which can cause damage to the oil pump components.
-
Use the recommended cutting equipment. Refer to Accessories.
-
Remove the cap to the chain oil tank.
-
Fill the chain oil tank with chain oil.
-
Attach the cap carefully.
Note: To see where the chain oil tank is on you product, refer to
Product overview.
