Replace a worn or damaged guide bar or saw chain with the guide bar and saw chain combination recommended by Husqvarna. This is necessary to keep the safety functions of the product. Refer to Accessories, for a list of replacement bar and chain combinations that we recommend.
-
Guide bar length, in/cm. Information about the guide bar length can usually be found on the rear end of the guide bar.
-
Number of teeth on bar tip sprocket (T).
-
Chain pitch, in. The distance between the drive links of the saw chain must align with the distance of the teeth on the bar tip sprocket and drive sprocket.
-
Number of drive links. The number of drive links is decided by the type of guide bar.
-
Bar groove width, in/mm. The groove width in guide bar must be the same as the chain drive links width.
-
Chain oil hole and hole for chain tensioner. The guide bar must align with product.
-
Drive link width, mm/in.
