To use the cutting technique
WARNING:
Use full power when you cut and decrease the speed to idle speed after each cut.
CAUTION:
Do not let the motor operate for too long without load. This can cause damage to the motor.
Put the trunk on a saw horse or runners.
WARNING:
Do not cut trunks in a pile. That increases the risk of kickback and can cause serious injury or death.
Remove the cut pieces from the work area.
WARNING:
Cut pieces in the work area increase the risk of kickback and that you cannot keep your balance.
To use the spiked bumper
To cut a trunk on the ground
To cut a trunk that has support on one end
To cut a trunk that has support on two ends
Parent topic:
Operation